Penofin® Red Label Ultra Premium Penetrating Oil 1 Gal

Penofin Ultra-Premium Red Label wood stain was created to meet the demand for an exterior wood finish that outperforms all other transparent wood stains.

The highly penetrating Brazilian Rosewood Oil base, from sustainably harvested seeds, protects and nourishes wood fibers far deeper than any other stain. With the added mildew protection, the "dark menace" will not attack wood so easily and helps preserve that freshly-milled look.

Penofin Ultra-Premium Red Label wood stain is perfect where rain, wind, snow, or high elevations are encountered. The formula in Ultra-Premium Red Label wood stain is the result of extensive testing, and the use of the highest quality ingredients.

Penofin wins the "Battle Of The Stains" penetration tests over all competitors and gives longer life to wood of any species. Easy to apply and simple to maintain.

• Ultra-Premium Formula Wood Stain for Extra Performance
• Increased transoxide pigments for 99% ultraviolet protection against fading
• Extra protection against mildew
• Ten transparent wood stain tones
• Brazilian Rosewood Oil wood stain that deeply penetrates to protect against moisture
• Pigments won't fade, turn chalky or wash off

Coverage	175-300 sq ft per gallon (depending on wood type and condition)
Dry to Touch	3-4 Hours
Serviceable	12 Hours
Moisture Resistant	24 Hours
Full Cure	4-7 Days
Clean Up	Mineral Spirits

The colors that appear on the screen and in print may not match actual applied color.

Product Performance Warranty - PENOFIN® exterior finishes are warranted to perform when applied to wood surfaces according to label instructions. For Blue Label Penofin expect 2 - 5 years on vertical surfaces, 1 - 2 years on horizontal surfaces depending on use and weather exposure. We recommend preserving the beauty of your horizontal surfaces by staining every 9 - 24 months. Color Test - Call 1-800-PENOFIN for samples. It is best to test PENOFIN on your wood to determine the desired color. The shade can be affected by the type of wood, the manner applied, the length of time the oil is left on, and by the number of coats. If the desired color is attained with one coat of a pigmented formula, the wet-sand process may be done with PENOFIN Natural. Maintenance - When you use Penofin, maintenance is a snap. Because Penofin is a low-solid product, there is no stripping or sanding necessary. Simply wash the surface with water and a mild detergent. Allow your wood surface to dry completely, approximately 48 hours before application. Coverage - Coverage depends on application method, texture, and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.