Penofin® for Pressure Treated Wood Penetrating Oil 1 Gal

Pressure-treated Penofin is formulated to restore the beautiful wood tones homeowners want. It comes in three natural tones and penetrates pressure-treated wood like no other stain. Brazilian

Rosewood Oil penetrates and stabilizes the wood fibers for control of carcinogenic releases, as stated by the Environmental Protection Agency. They recommend using a deep, low-solid, penetrating oil finish.

Penofin's pressure-treated formula contains sustainably harvested Brazilian Rosewood Oil to give the wood a natural tone and texture. Suitable for all types of pressure-treated wood.

Penofin pressure-treated tones are: Rainier, with golden honey tones to bring out the rich, smooth look of lighter woods; Tahoe, with rich cinnamon tones for that rich, bold look; and Yosemite, showing warm, dark brown tones that complement natural surroundings.

Best of all, Penofin pressure-treated oil finish is so easy to apply.

• Wood stain formulated to bring out the natural beauty of pressure-treated wood
• Wood stain formulated in three natural wood tones
• One-coat formula
• Meets EPA guidelines to lock in carcinogens in CCA wood
• Great performance on ACQ wood
• 99% ultraviolet protection

Coverage	175-300 sq ft per gallon (depending on wood type and condition)
Dry to Touch	3-4 Hours
Serviceable	12 Hours
Moisture Resistant	24 Hours
Full Cure	4-7 Days
Clean Up	Solvents

 

The colors that appear on the screen and in print may not match actual applied color.

Product Performance Warranty - PENOFIN® exterior finishes are warranted to perform when applied to wood surfaces according to label instructions. For Blue Label Penofin expect 2 - 5 years on vertical surfaces, 1 - 2 years on horizontal surfaces depending on use and weather exposure. We recommend preserving the beauty of your horizontal surfaces by staining every 9 - 24 months. Color Test - Call 1-800-PENOFIN for samples. It is best to test PENOFIN on your wood to determine the desired color. The shade can be affected by the type of wood, the manner applied, the length of time the oil is left on, and by the number of coats. If the desired color is attained with one coat of a pigmented formula, the wet-sand process may be done with PENOFIN Natural. Maintenance - When you use Penofin, maintenance is a snap. Because Penofin is a low-solid product, there is no stripping or sanding necessary. Simply wash the surface with water and a mild detergent. Allow your wood surface to dry completely, approximately 48 hours before application. Coverage - Coverage depends on application method, texture, and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.