DAP Patching Plaster

Description

Value priced, plaster patching product for everyday household repairs to surfaces such as plaster and drywall. Dries to hard finish with minimal shrinkage. Recommended for interior use only.

• Ready to use general purpose patching compound
• Dries quickly with minimal shrinkage
• Fills holes and cracks in plaster and drywall prior to painting

Extended Information

Surface Preparation & Application:

• Make sure surface to be repaired is clean and free of dust and particles. Use sandpaper to dull glossy

surfaces before repairing.

• Stir thoroughly before use. Apply with a clean putty knife.

• For a smoother finish, dip putty knife in water and lightly smooth plaster.

• Widen cracks in plaster with a putty knife or utility knife to at least 1/4 inch in width and brush away loose

particles.

• Patching Plaster can be sanded or painted 1 to 5 hours after application depending on temperature, humidity

and depth of fill. Wet sanding is recommended to avoid generation of dust.

• For repairs deeper than 1/4 inch: Apply two or more layers allowing to dry between applications. Apply first

coat to within a quarter-inch of surface and let set four to six hours. Complete patch on the second coat and

smooth. Allow this coat to dry at least 24 hours before painting. Drying times may vary depending on

room temperature.

• Clean tools immediately with water.

Shelf Life:

1 Year

Freezing:

Protect from freezing

Drying Time:

1 to 5 hours depending on temperature, relative humidity and depth of fill

Painting:

1 to 5 hours depending on temperature, relative humidity and depth of fill

Clean Up:

Wash tools immediately after use with water. Be sure container lid is closed and tightly sealed. Store in a cool,

dry place.