SURFACE PREPARATION
Spread a solvent resistant drop cloth covered with
newspapers around the work area in case of drips and
spills. Protect carpeting, furniture and porous ceilings
before application. Protect eyes and skin. Wear safety
goggles and chemical resistant gloves.
Note: Ensure good cross ventilation during application.
Wear a NIOSH approved respirator when spraying.
APPLICATION
Spray on or sponge apply DIF Gel Ready-To-Use on the
wallpaper surface. Do not use a fine mist sprayer. Protect
adjacent areas from overspray. Wait 15-20 minutes and
scrape off with the Paper Scraper. If the top layer does
not peel off easily, score (10 holes per square inch) with
Paper Tiger and apply more DIF Gel Ready-To-Use
Wallpaper Stripper. Allow DIF to penetrate for
10-15 additional minutes. Repeat the application if necessary.
To remove residual adhesive, re-apply DIF Gel, wait
15-20 minutes and scrape or sponge off. Rinse with clean water.
KEEP OUT OF REACH OF CHILDREN.
SPILLAGE
If spilled, contain spilled material and remove with an inert
absorbent. Dispose of contaminated absorbent, container
and unused contents in accordance with local, state and
federal regulations. Clean up rags, papers and waste
promptly.
CLEAN-UP
Clean up tools and equipment with soap and water.