How to Paint a Room Like a Pro Blog

How to Paint a Room Like a Pro: DIY Guide

Almost anyone can paint like a professional as long as they put their mind to it. While you might be quick to say otherwise, there’s no good reason why you shouldn’t be able to tackle the DIY project of your dreams with tools from and a few pointers.


As with so many of life’s challenges, the timing could very well be everything when it comes to finishing off a project like this.

Picking the Best Time to Paint a DIY Project

Before you start any major undertaking, you may want to wait for dry weather to cut down on the amount of humidity in the air. This is absolutely vital for anyone doing exterior work, but it’s also important for those doing interior painting because the level of humidity in a room can heavily impact the amount of adherence that a particular coat of paint will have.

Of course, timing isn’t everything so you’ll need a few other pointers as well.

Setting Up for a DIY Paint Project

Once you have everything ready, you’ll want to make sure that you do a complete inspection of the surface that you’re painting. Make sure that there aren’t any major imperfections in the wall and clean any debris off before you start.


You’ll want to make sure that you’re working with high-quality brushes like those from Wooster, Bestt Liebco and ArroWorthy from so you won’t have to worry about whether or not they’re going to be able to see the day through.

Know the nap on each roller you work with, so you won’t be working with something that’s too long or short for the type of paint you’re using. At the same time, you’ll want to protect anything you don’t want to be painted. Use drop cloths and masking tape to prevent extra paint from making its way onto conspicuous areas.

Remove the light switch and outlet covers. This isn’t at all difficult since they’re normally held on with nothing but screws. A small screwdriver might be all that you need to do so, but you need to take all relevant precautions when working with electricity.

After you’ve done all this, you’re ready to actually start the painting process.

Painting at Home without Assistance

Paint from top to bottom if at all possible and let the roller do the work for you if you can. A good quality roller should be able to do so. Perhaps most importantly, though, you’ll want to work with a good supplier like, which can get you all of the equipment you need as well as the primer to help get your walls ready for the painting process. In a majority of cases, you’ll want to use some kind of primer.

You won’t have to add another step to your DIY checklist. All you need to do is contact us using the form on our site and one of our representatives will answer any questions you might have so you can get the best type of painting gear available on the market today.

With, planning for your next DIY project couldn’t be any easier!