Cabot Problem Solver Wood Stripper 8004

Restore your outdoor wood surfaces to their natural beauty with Cabot Problem Solver Wood Stripper. This powerful, biodegradable formula is specially designed to tackle tough oil-based finishes on a variety of wood types.

Key Features:
• Effective on multiple wood types: cedar, redwood, pine, cypress, fir, and pressure-treated wood
• Biodegradable formula: environmentally conscious choice for wood restoration
• Versatile application: ideal for decks, siding, fences, railings, steps, and outdoor furniture
• Large coverage area: treats 150-200 sq. ft. per gallon

This professional-grade wood stripper efficiently removes stubborn oil-based finishes, preparing your wood surfaces for a fresh new look. Its liquid form allows for easy application, while the gallon jug provides ample product for larger projects.

For best results, follow the stripping process with Cabot Problem-Solver Wood Brightener #8003 to neutralize the surface. Note that this product is specifically formulated for outdoor use and is not recommended for hardwoods.

Revitalize your outdoor wood surfaces with Cabot Problem Solver Wood Stripper – the go-to solution for DIY enthusiasts and homeowners looking to breathe new life into their wooden exteriors.

Coverage
One gallon of Cabot Problem-Solver Wood Stripper #8004 will strip approximately 150-200 square feet of weathered oil finish. Wood Stripper #8005 will strip approximately 75-100 square feet. These rates may vary depending on porosity of the surface.
Where to Use
It is ideal for use on wood decks, siding, fences, railings, steps and outdoor furniture.

Preparing Your Surfaces
Because it is difficult to determine the condition of the oil-based coating to be stripped, test the undiluted stripper on a small area to determine its effectiveness. Use Cabot Problem-Solver Stripper #8005 to remove latex paints, stains and finishes. Cabot Problem-Solver Wood Stripper is an oil-based paint, stain and varnish remover. It will remove paint or stain on adjacent surfaces not intended to be stripped. Apply liberally and evenly on a dry, cool surface using a brush, roller or pump-type sprayer. Let stand for a minimum of 15 minutes. Do not allow the stripper to dry. If it begins to dry, lightly mist with a garden hose. Rinse thoroughly with a garden hose with the nozzle at maximum pressure or use a pressure-washing unit. Do not exceed 1000 psi (pounds per square inch).

Application
When applying and rinsing Cabot Problem-Solver Wood Stripper, walking surfaces, ladders and scaffolding may become slippery. Rinse all such surfaces thoroughly to remove overspray. Use wrap-around goggles with side shields, rubber gloves and protective footwear for protection from harmful chemicals. Remove any contaminated clothing immediately.