Great brush strokes and cleans very nicely too
Hi there, thanks for the great review! We’re glad the brush delivers smooth strokes and cleans up nicely. Thank you for choosing ThePaintStore.com!
Great bristles but the ferule is way to thin.
DAP 10 Oz Blacktop Asphalt Filler & Sealer 27065
|
DAP 10 Oz Blacktop Asphalt Filler & Sealer 27065 SKU: 27065-BOX-E |
Save by the box
Regular price
$89.38 Box of 12
$7.44 ea
|
||
DAP 10 Oz Blacktop Asphalt Filler & Sealer is an asphalt-based, low solvent formulation for the quick and easy repair of cracks in asphalt surfaces. Perfect for playgrounds, driveways, pavement and parking lots. Provides a durable, watertight, elastic seal. Repairs are ready for traffic in 24 hours. Textured for a professional-looking finish.
- Ready-to-use, asphalt-based formula for fast & easy repairs to asphalt surfaces
- Flows easily
- Waterproof & weatherproof seal
- Resists gas, oil, grease & salt
- Excellent adhesion and durability
- Resists crumbling due to temperature changes, UV light & severe weather conditions
- Won’t run or bubble in hot weather or crack in cold weather
- Dries to matte black finish
- Can be coated with asphalt or tar-based driveway dressings
Surface Preparation & Application:
1. Remove loose, damaged concrete or blacktop from surface. Crack surface must be free of grease,
oil and other foreign matter. Sweep or blow surface with compressed air to remove all mud, dirt,
dust and other loose debris.
2. Cut nozzle at a 45° angle to desired bead size.
3. Puncture inner foil seal.
4. Load cartridge into caulking gun.
5. Fill cracks and gaps with sealant.
6. Clean up excess uncured sealant with a damp sponge before it skins over. Cured sealant must be
cut or scraped away.
7. Allow sealant to cure for at least 24 hours before returning area to service, being directly
exposed to water or coating with asphalt or tar-based driveway dressing.
For Best Results:
Apply in temperatures above 50°F. Do not apply when rain or freezing temperatures are
forecasted for 24 hours.
Do not use below waterline.
Joint size should not exceed 3/8” wide x 3/8” deep. If joint depth exceeds 3/8” use backer rod
material.
Store away from extreme heat or cold.
Store above 50°F. Keep product from freezing. Store in heated area during cold weather.
Clean Up:
Clean up excess uncured sealant with a damp sponge before it skins over. Wash hands with warm water
and soap. Excess dried sealant must be cut or scraped away.