DAP Fast-N-Final Spackling Compound

Description

A superior lightweight, one-step spackling for repairing walls, ceilings, and woodwork in one fill. Delivers superior durability and performance. No sanding required. Dries quickly. Interior/exterior use.

DAP Fast 'N Final Lightweight Spackling lets you patch and prime in one easy step, saving time and money. It dries fast with no need to sand or prime, letting you paint in minutes for a virtually invisible repair. Ideal for repairing small holes, cracks and dents in drywall, plaster, wood and stucco. 

• Ability to patch & prime in one step, saving time and money
• Paint ready in 30 minutes
• No sanding required
• Won't sink or shrink

DAP Fast 'N Final Technical Data Sheet

Extended Information

Surface Preparation & Application:

Surface must be clean, dry and free of foreign material.

Mix gently before use.

Using a clean putty knife, press spackling into hole

or crack. Draw blade firmly across the surface to

remove excess material in one strike.

For a smoother finish, dip putty knife in

to water and lightly smooth spackling.

One coat should be sufficient for small repairs

May be painted within minutes with a latex paint.

Please follow paint manufacturer’s instructions for

application.

If sanding is desired, or if an oil-based paint is

to be used, allow to drythoroughly (approximately 24

hours).

Clean tools immediately with water.

For Best Results:

Do not apply when temperatures are below 40°F.

Do not apply outside if rain is expected within 24 hours.

Do not use on floors or as a caulk, sealant or joint
filler over cracks and joints where expansion and

contraction may occur.

DO NOT USE AS A SKIM COAT.

For exterior application, first apply

exterior-grade primer, then apply

spackling and finish with coating

of quality exterior-grade paint.

Do not use for tuck pointing applications on brick.

Clean Up:

Wash tools immediately after use with water. Dried

material must be cut of scraped away. Be sure

container lid is closed and tightly sealed. Store in

a cool, dry place away from extreme heat or cold.