Valspar Interior White Pro-Hide Interior Latex PVA Primer & Sealer Gallon 91112

Valspar Pro-Hide Interior Latex PVA Primer & Sealer is designed for use on interior drywall and masonry. It can be applied directly over existing coatings, bare drywall, or masonry. Providing good uniformity for any latex or oil topcoat, Valspar Pro-Hide PVA Primer & Sealer is fast drying and can be applied by brush, spray, or roller.

• Good uniformity for any topcoat
• Fast drying
• Ideal for priming & sealing new bare drywall

Coverage	400 sq ft per gallon
Dry to Touch	1-4 hours
Dry to Recoat	4 hours
Recommended Coats	1-2
Clean Up	Soap and water

Valspar Pro-Hide PVA Primer Sealer Product Data Sheet

Usage
Properly prepared interior drywall, wood and masonry surfaces.

Prep
Surface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt, dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.

Application
Stir primer thoroughly before and during use. Apply with a premium-quality polyester brush, pad applicator, roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Allow to dry at least 4 hours before applying a latex topcoat, overnight for oil topcoats.

Dry Time
Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour - 4 hour
Recoat: 4 hour

Clean-up & Disposal
Clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.