Wolman Woodlife CreoCoat Black Wood Preservative Gallon 14436A

Wolman Woodlife CreoCoat Wood Preservative is for use on below-ground, ground contact or water contact wood installations, especially non-pressure-treated lumber, to protect the structural integrity. Prevents termite and other insect attack, mold, mildew and other fungi attack, and dimensional change caused by water absorption.

• Color: Black
• Base Type: Water-Based
• Product Type: Wood Preservative
• Container Size: 1 gal
• Indoor or Outdoor: Outdoor
• Full Cure Time: 24 hr
• Time Before Recoating: 60 min
• Color Family: Black
• VOC Level: 320 g/L
• Paintable: Yes
• Coverage Area: 200 sq ft
• Transparency: Semi-Transparent
• Form: Liquid
• Container Type: Can
• Collection Type: CreoCoat
  • EPA-registered, insecticidal preservative
  • Prevents termite damage, rot and decay
  • Inhibits surface growth of fungal organisms: mold, mildew and staining fungi
  • Imparts a solid black finish when applied as directed 

  For Best Results

  Preparation is key to maximizing the product’s performance To properly prepare your surface, use either the Wolman™ DeckStrip® or DeckStrip® ASR, then clean with Wolman™ DeckBrite™ or Deck & Fence Brightener.
  If wood is brand new and intended for outdoor installation and exposed to weather conditions for 30 days or less, a “splash test” should be performed to determine if there is any surface barrier present which would repel a new coating. Sprinkle a few drops of water on several areas of the surface to be coated. If the water is absorbed rapidly, the surface is ready to be finished with WOODLIFE^® CreoCoat®. If the water beads are not absorbed into the wood, a surface barrier exists and must be removed. Apply Wolman^® DeckStrip^® or Wolman® Deck & Fence Brightener and then test again. Regardless of the surface’s age or condition, failure to follow proper preparation methods will result in poor adhesion and/or possible coating failure.

Technical Data Sheet