I love the brush it’s an old school brush that’s always out of stock I can’t believe you guys had it! No brush marks holds a lot of paint!
Barton Kramer 324 Silver Screen Door Pneumatic Closer
|
Barton Kramer 324 Silver Screen Door Pneumatic Closer SKU: 324C-E |
Each
Regular price
$14.72 ea
|
Save by the box
Regular price
$82.40 Box of 6
$13.73 ea
|
The Barton Kramer 324 Silver Screen Door Pneumatic Closer is the perfect choice for all out-swinging doors. This pneumatic closer features an adjustable closing speed and full 90° opening for maximum convenience and ease of use. Built with all aluminum and stainless-steel components, it will provide a long, rust-free life. Plus, the sleek silver finish will make any door look great. All mounting hardware included.
| Hole Spread | 15 in. |
| Depth | 1.25 in. |
| Height | 14.5 in. |
| Width | 4.25 in. |
| Material | Aluminum and Stainless Steel |
This closer may be installed at any desired location on the door, however the recommended location is at the top of the door, or on the mullion strip near the center of the door.
Note: Before installation, check door to see that it closes freely. (use of a little oil or soap on threads makes driving screws much easier.)
- On hinge side of door, at the desired height, fasten the jamb bracket to the door jamb with the (4) long screws and (2) short screws. The open side of the bracket should be 1/4€³ from door as shown.
- Slide hold-open washer on rod. Using short connecting pin, connect closer to jamb bracket. Hold-open washer should be positioned over lugs against closer tube a shown. This will give proper tension for installation. (Do not change until installation is complete.)
- Attach door bracket to FRONT hole of the closer with long connecting pin. With door tightly closed, hold closer and door bracket against door in level position, mark and drill (2) 1/8€³ pilot holes. Caution: Do not drill holes all the way through the door. Fasten door bracket to door as shown with short screws. Open door and move hold-open washer back of lugs on rod. Closer is now ready to operate.
Speed Adjustment
- To regulate closing speed of door, turn adjusting screw counter-clockwise for faster and clockwise for slower.
Snap Action Closing
- Installed as directed above, the closing speed of door will accelerate in the last few inches of travel. If a smoother, quieter closing action is desired, hold door open about 8€³ with hold-open washer, remove the long connecting pin and relocate closer in rear hole.