Cabot Problem Solver Wood Cleaner 8002

Revitalize your outdoor wooden surfaces with Cabot Problem Solver Wood Cleaner 8002. This powerful, ready-to-use formula is designed to tackle dirt, mildew stains, and other stubborn contaminants, preparing your wood for a flawless stain application.

• Fast-Acting Formula: Quickly removes dirt, mold, and mildew stains from unfinished or weathered wood surfaces
• No Dilution Required: Convenient ready-to-use cleaner saves time and effort
• Versatile Application: Ideal for decks, fences, exterior steps, outdoor furniture, and patios
• Multi-Surface Cleaner: Effectively cleans wood, composite decks, and concrete
• Generous Coverage: Treats up to 200 sq. ft. per gallon
• Easy Clean-Up: Simply use soap and water after application
• Quick Dry Time: Dries in just 15-20 minutes, allowing for faster project completion

Prepare your outdoor spaces for a stunning transformation with Cabot Problem Solver Wood Cleaner 8002. Whether you're refreshing your deck, sprucing up outdoor furniture, or cleaning concrete patios, this powerful cleaner sets the stage for a successful staining project. Experience the satisfaction of restoring your weathered wood to its former glory with this easy-to-use, fast-acting solution.

Coverage

This ready-to-use wood and deck cleaner covers approximately 200 sq. ft. per gallon (3.78 L). Concentrated formula dilutes to cover 1000 sq. ft. per gallon bottle.

Where to Use

Use on exterior wood decks, siding, fences, railings, steps and most exterior surfaces including aluminum, vinyl, plastic and masonry.

Preparing Your Surfaces

Test this product first on a small, hidden area to determine its effectiveness. Before you begin your wood cleaning project, protect your shrubs and glass surfaces by wetting them down with water and covering them in plastic. Hose off your glass frequently, too prevent streaking, and hose off your shrubs when the job is done.

Application

Apply liberally to problem surfaces. Do not apply to hot surfaces. To avoid a non-uniform appearance on vertical surfaces start at the bottom, doing a small section at a time, then continue to the top, making sure to rinse thoroughly. Let set for 15-20 minutes. Stubborn areas may require scrubbing with a stiff bristle brush. If surface begins to dry quickly, lightly mist with water.

Important: Allow cleaned surface to dry completely before staining or painting.