DAP 10.3 Oz Gray Watertight Concrete Filler & Sealant 18096

Description

DAP Concrete and Mortar Filler and Sealant is a high-performance sealant formulated to repair cracks and holes in concrete, mortar and masonry. Contains silicone additives for improved adhesion and water resistance. Forms a durable, flexible and watertight seal. Resists gas, oil, grease and salt. Interior/ exterior use. Paintable. Easy water clean-up.

• 100% waterproof & weatherproof seal
• Paintable
• Excellent flexibility & adhesion
• Easy water clean-up
• Low odor
• Interior/exterior use

Extended Information

Surface Preparation & Application:

1. Surface must be clean, dry and free of all loose or damaged concrete.

2. Cut nozzle at 45° angle to desired bead size.

3. Load cartridge into conventional caulk gun.

4. Fill cracks and gaps with sealant.

5. After application, a more uniform fill or neater appearance may be obtained by wetting a trowel

or putty knife with water and tooling sealant lightly.

6. Clean up excess sealant with a damp cloth before it skins over (30 minutes).

7. Excess cured sealant will need to be cut or scraped away.

For Best Results:

• Apply in temperatures above 40° F. Do not apply when rain or freezing temperatures are expected.

• Do not use for below waterline applications.

• Joint size should not exceed ½” wide by ½” deep. If joint exceeds ½” use foam backer rod.

• Paintable after 2 hours (longer in cool or humid conditions) with latex or oil

-based paints.

• Allow to cure 24 hours before direct exposure to water (longer in cooler and/or humid conditions).

• Fully cures in 7-14 days, depending on temperature, humidity and depth of fill.

• Store sealant away from extreme heat or cold.

Shelf Life:

12 months

Coverage:

56 linear feet at 3/16” diameter bead

Clean Up:

Clean up excess uncured sealant with a damp cloth before it skins over (30 minutes). Dried material must be cut or scraped away.