DAP 10 Oz Side Winder Advanced Siding & Window Sealant

DAP 10 Oz White Side Winder Advanced Siding & Window Sealant Clear

DAP 10 Oz Clear Side Winder Advanced Siding & Window Sealant 00816

SKU: DAP00816-BOX

Save by the box

Regular price $99.59 Box of 12 $8.29 ea
DAP 10 Oz Side Winder Advanced Siding & Window Sealant White

DAP 10 Oz White Side Winder Advanced Siding & Window Sealant 00801

SKU: DAP00801-BOX

Save by the box

Regular price $86.82 Box of 12 $7.23 ea

Selected itemsItems: 0

Total: $0.00

DAP Side Winder Advanced Siding & Window Sealant is made from an advanced polymer formula. Delivers excellent performance on vinyl, fiber cement, aluminum and wood siding. Permanently flexible.

For wet weather and low temperature applications. 

  • 100% waterproof & weatherproof
  • Exterior/interior
  • Lifetime guarantee
  • 1 hour rain ready
  • 1 hour paint ready
  • Extreme temperature application range: 20°F - 120°F
  • Wet/damp surface adhesion
  • Shrink & crack proof
  • Superior adhesion & flexibility
  • Low odor
  • Meets ASTM C920, Class 25
Surface Preparation & Application:
1. Surface must be clean, dry & free of caulk.
2. Cut nozzle at 45° angle to desired bead size.
3. Puncture inner foil seal.
4. Load into caulking gun.
5. Fill gap. If joint depth exceeds 1/2” x 1/2”, use backer rod.
6. Smooth bead.
7. Clean up excess w/ mineral spirits. Scrape away cured sealant.
8. Paintable after tack free (less than 2 hours depending on temp./ humidity).
NOTE: Paintable w/ most latex paints. For best
results, use latex primer for oil-based paints. Not
for window glazing or continuous underwater use.

Store below 80°F.
Apply in temps. between -35°F & 140°F.
Indoor/outdoor use.

For Best Results:
• Store caulk away from extreme heat or cold
• Not recommended for use underwater or below grade, on stovepipes, or chimneys, fireplace
applications, tuck-pointing, or surface defects.
• Joint width should not exceed 1/2”. If joint depth exceeds 1/2”, use a backer
rod or a polyethylene foam as a backup filler.
• Not recommended for structural glazing.
• Do not use where abrasion and physical abuse are encountered.
• Allow 24 hours for sealant to cure. Sealant will not cure in totally confined spaces.

Coverage: 50 linear feet at 3/16” diameter bead

Clean Up:
Before curing, remove excess material with a solvent-moistened towel. After product has cured, material must be cut or scraped away. Wipe off all excess sealant before cleaning. Clean tools with mineral spirits.

DAP 10 Oz Side Winder Advanced Siding & Window Sealant

Selected itemsItems: 0

Total: $0.00