Flood Clear Wood Finish CWF-UV

Recommended For

• Exterior use only
• All new or weathered exterior wood that is porous enough to accept a penetrating finish
• Exterior decks, fences, siding and furniture

Application Tips

• New wood requires time to dry out and open pores before finishing. To test, pour a cup of water on a horizontal wood surface. If it is absorbed into the wood within 30 seconds, it is ready to be finished.
• Proper surface preparation is essential for the limited warranty to apply — see side of product label for limited warranty details.
• Surfaces must be clean, free of dirt, grime, mildew and previous coatings.
• Weathered, uncoated surfaces: clean with Flood WOOD CLEANER prior to coating.
• Previously coated surfaces: remove finish with Flood WOOD STRIPPER prior to coating.
• Allow wood to dry 48 hours before finishing.
• If applying with a roller or sprayer, always backbrush.
• Apply between 50° F - 80° F.

Available Sizes

• 1 gallon
• 5 gallon

Coverage

• 150 - 250 sq ft/gal (13.9 - 23.2 sq m/gal)
• Coverage will vary depending on the type, age and texture of the wood.

Dry Time

• 24 - 48 hours, depending on temperature and humidity

VOC

• Does not exceed 350 g/L