I used it as a finish within the interior of a large cabinet. I first used a gloss sheen Val spar product as a base coat (in a similar color). Doing so reduced my coats required of the metallic. I’m very pleased with the project. (Make sure to stir/shake paint thoroughly before applying.)
Kilz Premium Primer/Sealer
|
Kilz Premium Primer/Sealer Gallon 13001 SKU: 13001-1 |
Each
Regular price
$49.12 ea
|
Save by the box
Regular price
$157.02 Box of 4
$39.25 ea
|
|
Kilz Premium Primer/Sealer Quart 13002 SKU: 13002-1 |
Each
Regular price
$17.54 ea
|
Save by the box
Regular price
$84.60 Box of 6
$14.10 ea
|
|
Kilz Premium Primer/Sealer 5 GALLON 13000 SKU: 13000-E |
Each
Regular price
$166.43 ea
|
KILZ Premium primer is a superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stainblocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating.
KILZ Premium Features:
- High hide formula/blocks previous colors & medium stains
- Seals surfaces for uniform finish
- Mildew-resistant
- Zero VOC/low odor
- Stains: water, smoke, tannin, ink, pencil, felt marker and grease
- Odors: pet, smoke, food
- Use on wood, ferrous metals, cast iron, wrought iron, steel cured plaster, wallpaper, masonry, CMU, under or over latex or oil-based paint
Kilz 3 Premium Primer Technical Data Sheet
Warning: Cancer & Reproductive Harm: www.P65Warnings.ca.gov
PRODUCT SPECIFICATIONS
| Base | Water |
| Int/Ext | Int/Ext |
| Color | White |
| Coverage - Low | 300 sq. ft. |
| Mils Wet | 5.3 |
| Mils Dry | 2.2 |
| Coverage - High | 400 sq. ft. |
| Mils Wet | 4 |
| Mils Dry | 1.6 |
| Finish @ 85o | < 10 |
| Min Application Temp | 50oF (10oC) |
| Max Application Temp | 90oF (32oC) |
| Dry To Touch | 30 min |
| Dry To Recoat | 1 hour |
| Max Tint | 2 oz |
| VOC | 95 g/L |
| Brush | Nylon / Poly |
| Roller - Smooth | 3/8" - 1/2" nap |
| Roller - Porous | 1/2" - 3/4" nap |
| Spray Tip | .015" - .021" |
| Spray Filter | 60 mesh |
| Spray Pressure | 2,500 - 3,000 |
| Volume Solids | 54.7% (+/-) 2% |
| Weight Solids | 40.5% (+/-) 2% |
| Viscosity | 95 - 105 KU |
| Flashpoint | N/A |
WHERE TO USE
Use on properly prepared interior and exterior surfaces, such as:
- Brick
- Painted Metal
- Properly Prepared Glossy Surfaces
- Drywall
- Paneling
- Stucco
- Masonry
- Plaster
- Wood
SURFACE PREPARATION
- The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
- For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming.
- Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
- Wash the area with a mildew remover, rinse with water and allow to dry before priming.
- KILZ PREMIUM may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ PREMIUM.
- It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS.
APPLICATION
- Eye protection is recommended.
- A small amount of water may be added for spray applications, but do not thin for stainblocking applications.
- Stir thoroughly before and occasionally during use.
- Apply using a brush, roller or sprayer.
- Only apply if surface, air and product temperatures are between 50°-90°F.
- Prime the entire surface to ensure a uniform appearance of the topcoat.
- After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
- Tinting is not recommended for stainblocking applications. KILZ PREMIUM may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended.
- Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.
DRY TIME at 77°F (25°C), 50% RH
CLEAN UP & DISPOSAL - Dries to the touch in 30 minutes.
- Can be recoated or topcoated in one hour with latex or oil-based paint.
- Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.
- Clean equipment and paint spatters with warm, soapy water.
- Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
- To recycle or properly dispose of paint or primer in your community, call 1-800-CLEANUP.