Minwax Polycrylic Max

Maximize your project finishes with Minwax Polycrylic Max. This premium, crystal-clear topcoat offers one-coat protection, saving you time and effort. Its easy application and 1-hour dry time provide a smooth, durable finish. Enjoy the added benefits of non-yellowing, scratch resistance, and low odor on all wood species.

• For use on woodwork, furniture, doors and cabinets
• Complete projects up to 2x faster compared to regular Minwax Polycrylic
• No intercoat sanding needed
• Max durability in one coat
• Dries in 1 hour
• Non-yellowing and non-ambering
• Low Odor
• Protects against scratches, spills and more
• For use on all woods including ash, birch and maple
• Water-based for easy soap and water clean up
• Can be used over all Minwax Oil-Based and Water-Based stains and colors

Coverage	400 sq ft per gallon/100 sq ft per quart
Opacity	Clear-Crystal Clear
For Use Location	Indoors
Dry Time	1 hour-24 hours
Recoat Time	2 Hours
Recommended Coats	1
Clean Up	Soap and Water

Minwax Polycrylic Max Product Data Sheet

Application Directions

Preparation Warning

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

APPLICATION

Surface must be dry and free of wax, grease, polish, old finishes in poor condition or any foreign matter. Sand to a smooth, uniform surface.

DO NOT USE STEEL WOOL. Remove dust with a tack cloth (suggested), or a damp cloth. Let dry completely. If desired, apply stain such as Minwax® Water-Based Wood Stain or Minwax® Wood Finish™ stain to bare wood surfaces following label directions. Wait at least 24 hours before applying Minwax® Polycrylic® Max over Minwax Wood Finish stain. Stir well before and regularly during use. DO NOT SHAKE.

Apply a coat of Minwax Polycrylic Max with a high-quality, synthetic bristle brush. Apply in the direction of the wood grain in one smooth, uniform coat. (DO NOT OVERBRUSH). (IF a second coat is desired, let dry at least 2 hours, then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats).

Allow 1 hour before light handling and 24 hours before normal use.

CAUTIONS

CONTAINS BUTOXYPROPANOL. Use only with adequate ventilation. To avoid over exposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.

FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.