Minwax Polycrylic Protective Finish

Minwax® Polycrylic® Protective Finish is a crystal clear, fast-drying protective topcoat for use over bare wood, oil- and water-based stains, paint and wallpaper. It has very little odor, is non-flammable, cleans up easily with soap and water, and can be recoated in only 2 hours. Minwax® Polycrylic® resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.

Minwax Polycrylic® is not recommended for use on floors. However, it is suitable for use on previously stained wood. This makes it a versatile choice for a variety of projects where a clear, water-based finish is desired.

Key Features:

• Non-Floor Applications: Ideal for furniture, trim, cabinets, and other wood surfaces.
• Compatibility: Can be applied over previously stained wood, providing a durable, clear finish.
• User-Friendly: Easy to apply and clean up with soap and water.

By understanding where and how to use Minwax® Polycrylic®, you can ensure your wood projects have a professional and lasting finish.

• Minwax Polycrylic Protective Finish protects and adds beauty to interior wood projects, including woodwork, furniture, doors and cabinets
• Clear top coat protects against scratches, spills, dirt and more
• Crystal clear finish ideal for use over all Minwax Oil-Based and Water-Based Stains and colors
• For use on all wood species including light woods like maple, ash and birch
• For use on all wood species including light woods like maple, ash and birch
• Water-based wood finish allows for easy soap and water clean-up
• Non-yellowing, non-ambering and low odor

Coverage	125 sq ft per quart
Location Use	Interior
Opacity	Clear-Crystal Clear
Dry Time	3-24 Hours
Dry to Recoat	2 Hours
Recommended Coats	3
Cleanup	Water Cleanup

Surface must be dry and free of wax, grease, polish, old finishes in poor condition, or any foreign matter. Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a cloth dampened with water or mineral spirits. Let dry completely. If desired, apply Minwax® Wood Finish™ or Minwax® Water-Based Wood Stain to unfinished interior wood surfaces following label directions. Wait at least 24 hours before applying Polycrylic® over Minwax® Wood Finish™. Stir well before and regularly during use. DO NOT SHAKE. Finish appears milky in can but dries crystal clear. Apply a thin coat of Polycrylic® with a high-quality synthetic bristle brush. Apply in one direction with the grain. Do not overbrush. Let dry at least 2 hours then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Do not use steel wool. Remove all dust. Apply second coat. For additional coats, repeat Step 6 before applying. Three coats are recommended. After final coat, allow 3 hours before light handling and 24 hours before normal use. Application Tools and Surfaces Apply with Brush: Yes Apply with Paint Pad: No Apply with Paint Sprayer: No Apply with Roller: No For Use with Hardwood Floors: No For Use with Moulding and Trim: Yes For Use with Shelving: Yes For Use with Small Projects: Yes Product Properties Base Material: Water-based Gel: No Clean-up Method: Soap and water Number of Coats Recommended: 2 Conditions: No Package Quantity: 1 Dries Clear: Yes Pre-Tinted: No Dry to Re-Coat: 1-2 hours Protects: Yes Dry to Touch: 4 hours Finishes: Yes Seals: No For Use on Clear Coated Wood: Yes Sheen: Satin For Use on Fiberglass: No Stain and Polyurethane in One: No For Use on Hardwood: Yes Stain and Sealer in One: No For Use on New or Bare Wood: Yes Stains: No For Use on Plywood: Yes Tint Base: N/A For Use on Previously Stained Wood: Yes Tintable: No For Use on Softwood: Yes Transparency: Transparent For Use on Stripped Wood: Yes Unit of Measure: Fluid ounce(s) For Use on Veneer: No Unit of Measure Quantity: 32.0 For Use with Doors: Yes Use Location: Interior For Use with Furniture and Cabinets: Yes Warranty: Limited lifetime