Minwax Pre-Stain Wood Conditioner

Minwax® Pre-Stain Wood Conditioner penetrates the grain of the wood to promote uniform acceptance of wood stain. Minwax® Pre-Stain Wood Conditioner helps prevent streaking and blotching to help ensure a beautiful, even stain. It is specifically designed for use before staining new or bare softwood surfaces.

• Specifically designed to use before staining to help prevent streaking and blotching and help ensure a beautiful, even stain.
• Quickly dries in 15 minutes to minimize project time.
• Can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch, and maple.
• Evens out the absorption of oil-based stains

1. Apply before staining on clean, raw wood, using a brush or cloth.
2. Allow to penetrate for 5 to 15 minutes, then remove excess with clean, dry cloth.
3. The stain should be applied within two hours of application of Minwax® Pre-Stain Wood Conditioner. For best results, stain with Minwax® Wood Finish™, Minwax® Gel Stain, Minwax® PolyShades®.