Old Masters Blended Tung Oil Varnish

Old Masters Blended Tung Oil Varnish is formulated by blending tung oil with fine varnishes to produce a durable, non-oily finish for fine furniture and wood projects and is water and alcohol resistant.

Has more build than 100% Pure Tung Oil, and it also penetrates the wood to protect and enhance the natural beauty and richness of the woodgrain.

Technical Data Sheet

Coverage	678 sq ft per gallon (depending on wood condition)
Dry Time	4-6 Hours
Clean Up	Solvent

Where to Use
Tung Oil Varnish is recommended for use on interior, bare wood surfaces. Ideal for use on antiques and fine furniture. Can also be applied to cabinets, furniture, tables, and bar tops.

Surface Preparation
All surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants.

Application
• Apply Old Masters Tung Oil Varnish with a lint-free cloth, rubbing in the direction of the woodgrain. For brushing applications, brush in the direction of the woodgrain.
• Wipe off excess with a clean, lint-free cloth.
• Allow the surface to dry for 4 to 6 hours.
• Buff lightly with fine steel wool and remove dust prior to recoating.
• Reapply. Subsequent coats of Tung Oil Varnish will increase the depth and luster of the finish.

Thinning
Do not thin. Use as packaged.

Coverage
Approximately 678 square feet per gallon depending upon method of application and the type and porosity of wood.

Drying Time
Apply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Tung Oil Varnish will dry in approximately 4 to 6 hours.

Cleanup
Using a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.

DANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.

MAX VOC: 450 g/L (3.76 lb/gal)