Ready Seal Readybright Wood Brightener 410

READYbright Wood Brightener is a concentrated formula designed to restore wood’s natural beauty by brightening surfaces and neutralizing residues from READYremove™ Wood Stripper and READYclean™ Wood Cleaner.

It effectively removes tannins and mill glaze, opens the wood grain, and revitalizes the original color, including pressure-treated wood, preparing it perfectly for staining. Ideal for professionals seeking precise wood restoration before finishing.

PREPARATION

Protect nearby surfaces and vegetation from over-spray or run-off by wetting down and/or covering prior to cleaning with READYbright. Pre-wet surfaces to be treated, and make sure they are free of debris. NOTE: Test for concentration level in an inconspicuous area before use. CAUTION: DO NOT MIX WITH BLEACH. AVOID CONTACT WITH METAL SURFACES.

APPLICATION

Once nearby area is prepped, pre-wet, and desired neutralization strength is determined, apply READYbright liberally to surface in a uniform manner using a pump sprayer (without aluminum parts), mop, brush, or roller. Allow solution to dry on the wood. Once product has dried to a powdery finish, remove residue from wood surface by thoroughly rinsing in the direction of the wood grain with a garden hose or a power washer on a low pressure setting (1000 PSI or less), being careful not to damage the wood. Results may vary based on age or condition of wood. If necessary, repeat process and/or increase dilution strength until desired results are achieved. One gallon of dilution mixture covers approx. 200 sq. ft. Allow wood to dry thoroughly (12% moisture or less) before applying READY SEAL® Exterior Wood Stain.