Roman Pro 732 Extra Strength Heavy Duty Clay-Based Wallpaper Adhesive 10001

Description

PRO-732 is a contractor grade clay adhesive. It is excellent for vinyl over vinyl applications when used in conjunction with ROMAN R-35 primer. For light to heavy weight vinyl wall coverings. Excellent adhesion with a smooth, thick consistency. Covers approximately 200 square feet per gallon.

Extended Information

Coverage:

Approximately 200 square feet per gallon

Surface Preparation:

Surface must be free from grease and other residues,

dry, smooth and structurally sound. Check surfaces

for paint bonding, loose wallcoverings, damaged wallboard,

or plaster.

Repair all unsound surfaces. Prime all surfaces (including

oil-based coatings) with an acrylic primer. Before proceeding

with any unusual conditions, consult your adhesive or

wallcovering supplier.

Application Method:

Use only when the room temperature is above 50 degrees F.

Apply an even coat of adhesive with a roller or brush.

PRO-732 is recommended for roller application, and is formulated

to spread easily with a roller.

Avoid contact with the surface of embossed, textured, or

delicate wallcoverings.

Drying Time:

Varies, depending on the temperature, ventilation,and

humidity of the room.

Clean-Up:

Before the adhesive dries, remove the excess with

clean water.  Additional effort may be required if

the adhesive is allowed to contact the surface of

embossed or textured vinyls.