Up to approx. 280 square feet per gallon
Surface Preparation:
Surface must be free from grease and other residues,
dry, smooth and structurally sound. Check surfaces
for paint bonding, loose wallcoverings, damaged wall-board
or plaster.
Repair all unsound surfaces. Prime all surfaces (including
oil-based coatings) with a Roman acrylic primer. Before
proceeding with any unusual conditions, consult your adhesive
or wallcovering supplier.
Application Method:
Use only when the room temperature is above 50F.
Apply a thin, even coat of adhesive with a pasting
machine, brush or roller. Avoid contact with the surface of
embossed, textured or delicate wallcoverings. For pasting
machine use, thin with a maximum of one pint of water per
gallon of adhesive.
Drying Time:
Varies, depending on the temperature, ventilation and
humidity of the room.
Clean-Up:
Before the adhesive dries, remove the excess
with clean water. Additional effort may be required
if the adhesive is allowed to contact the surface of
embossed or textured vinyls.
