RECOMMENDED PRIMER
No primer recommended, however using white as a
background makes fluorescent appear more brilliant.
SURFACE PREPARATION
Remove all dirt, grease, or other contaminants
by washing the surface with detergent or other
suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry.
Scrape and wire brush or power tool clean to
remove loose rust, scale, and deteriorated coatings.
Scarify previously painted coatings or smooth surfaces to
promote adhesion. Test for compatibility with existing coating.
APPLICATION
Apply only when air and surface temperatures are above
50°F (10°C) to ensure proper drying.
Use in properly ventilated area. Spraying can
produce a fog that will travel. Protect surrounding
area, clothing and skin from overspray.
Do not use near open flame.
CLEANUP
When finished spraying, clear spray valve by turning can
upside down and pushing spray button for 5 seconds.
If valve clogs, twist and pull off spray tip and rinse it in a
solvent such as mineral spirits. Do not stick a pin or other
object into the stem. Throw away empty can in trash pickup. Do
not burn or place in home trash compactor.