Rust-Oleum Glow In The Dark Paint

Description

Rust-Oleum Specialty Glow in the Dark Brush-On Paint glows for up to 2 hours. Apply to wood, metal, plaster, masonry or unglazed ceramic. Washes with soap and water.

PRODUCT FEATURES:
Fast-drying
Indoor use only
Great for kids rooms, school projects and holiday decor

Extended Information

SURFACE PREPARATION

Remove all dirt, grease, oil, salt and chemical

contaminants by washing the surface with a commercial

detergent, or other suitable cleaning method. Rinse with

fresh water and allow to thoroughly dry. Remove loose

paint and rust with a wire brush or sandpaper. Lightly sand

glossy surfaces.

WARNING! If you scrape, sand, or

remove old paint, you may release lead dust. LEAD IS

TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE

SERIOUS ILLNESS SUCH AS BRAIN DAMGE,

ESPECIALLY IN CHILDREN. PREGNANT WOMEN

SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH

approved respirator to control lead exposure. Clean up

carefully with a HEPA vacuum and a wet mop. Before you

start, find out how to protect yourself and your family by

contacting the U.S.EPA/Lead Information Hotline at
1-800-424-LEAD or log on to www.epa.gov/lead.

PRIMING

Use of a Rust-Oleum White primer provides added

corrosion protection, enhances adhesion and hiding, and

is especially recommended for metal and wood surfaces.

Recommended primers include

224430T Painters TouchFlat White Primer
7980502 American Accents Flat White Primer
249058 Painters Touch White Primer

APPLICATION

Apply only when air and surface temperatures are above

50ºF (10ºC) and 90ºF (32ºC) and humidity is below 85% to

ensure proper drying. Before using, mix thoroughly to

ensure any settled pigment is re-dispersed. Thinning is

not required. Avoid painting in direct sunlight or on hot

surfaces. Use a good quality synthetic brush
or ¼”-⅜”nap roller.

Avoid excessive brushing as this will reduce film

thickness and protection. Use light even strokes to ensure

smooth and uniform flow. Apply two coats 45 minutes

apart to achieve maximum glowing effect.

DRY & RECOAT TIMES

Dry and recoat times are based on 70ºF (21°C) and 50%

relative humidity. Allow more time at cooler temperatures.

Dries to touch in 45 minutes, dries to handle in 2 hours,

and can be recoated in 45 minutes.

CLEAN-UP

Clean brush and other application tools immediately with

soap and water.