SURFACE PREPARATION
Spread a solvent resistant drop cloth covered with
newspapers around the work area in case of drips and
spills. Protect carpeting, furniture and porous ceilings
before application. Protect eyes and skin. Wear safety
goggles and chemical resistant gloves.
Note: Ensure good cross ventilation during application.
Wear a NIOSH approved respirator when spraying.
APPLICATION
Spray on or sponge apply DIF Fast-Acting on the
wallpaper surface. Do not use a fine mist sprayer.
Protect adjacent areas from overspray. Wait 5-10 minutes and
scrape off loose wallpaper with the Paper Scraper.
If the top layer does not peel off easily, score (10 holes per
square inch) with Paper Tiger and apply more DIF
Fast-Acting Wallpaper Stripper. Allow DIF to penetrate for
5-10 additional minutes. Repeat the removal process and
re-apply the stripper if necessary. To remove residual
adhesive, re-apply the DIF solution, wait 5-10 minutes and
scrape or sponge off. Rinse with clean water.
KEEP OUT OF REACH OF CHILDREN.
SPILLAGE
If spilled, contain spilled material and remove with an inert
absorbent. Dispose of contaminated absorbent, container
and unused contents in accordance with local, state and
federal regulations. Clean up rags, papers and waste
promptly.
CLEAN-UP
Clean up tools and equipment with soap and water.