Zinsser Roll-A-Tex Texture Additive

Description

Whether you want to disguise imperfections or upgrade the look of your wall, Rust-Oleum® Zinsser® Roll-A-Tex® Texture Additive For Paint does the trick. This high-performance formula permanently fills cracks, instantly hides flaws and beautifies any surface.

• Available in fine, medium & coarse textures
• Permanently fills and covers cracks and flaws
• Eliminates the need for tedious and time-consuming crack repairs
• Hides building defects
• Covers repaired surfaces in one coat, without priming
• Prevents soaking, blotching and uneven paint colour
• Restores and beautifies in one low-cost application with a roller or brush

FOR BEST RESULTS

Keep mixture as thick as possible, yet still rollable.

Technical Data Sheet

Coverage	Coarse - 80-120 sq feet  Medium - 100-120 sq ft  Fine - 150-200 sq ft Coverage depends on product application
Clean Up	Soap and Water

Extended Information

Fine Texture is designed for use on interior or exterior

surfaces providing a “one-step” texture for any new

construction surface. This easy-to-apply texture covers

hairline cracks on repaired surfaces.

Medium Texture is designed for interior or exterior

surfaces providing excellent repair qualities to fill and

cover moderately flawed and cracked surfaces. It may be

used on smooth surfaces where a pronounced textured

look is desired or with extensively cracked walls that

require extra cover-up.

Coarse Texture is excellent for interior or exterior surfaces

where a higher degree of “fill-in” and covering qualities are

required. It is suitable for use on large cracks and

extensively repaired surfaces or wherever a more defined

texture is desired. It provides excellent texturing to cinder

blocks and brick in only one coat.

COVERAGE

Coarse–80 to120 square feet–depending on product application

Medium–100to120 square feet–depending on product application

Fine–150 to200 square feet–depending on product application

INSTRUCTIONS FOR USE

Apply only when air, material, and surface temperatures

are between 50-90ºF (10-32ºC) and the relative humidity

is below 85%. While mixing, wear a NIOSH approved dust

mask. In a separate container, add the contents of the

package to one gallon of any paint. Add less for surfaces

in good condition and more for surfaces that require more

hiding and texturing. Thoroughly mix to ensure that the

contents are incorporated. For best results, keep the

mixture as thick as possible for best coverage. Use a

⅜” to ¾” nap roller cover. Apply with light pressure and roll

out on the surface. Less rolling will produce a better texture. A

second coat of paint may be applied after partial or

complete drying for greater hiding and a better texture.

CLEAN-UP

Clean hand and application tools with warm soapy water.