Zinsser SureGrip Seam & Repair Adhesive

Description

SureGrip Seam and Repair Adhesive “Sticks & Stays!” The professional strength formula sets faster and bonds stronger than traditional wallcovering seam adhesives. It seals down stubborn curling seams, loose edges, tears and overlaps in just 10 seconds and features a non-drip formula that makes application neat and easy. It dries clear, so it won’t stain wallpaper or paint and cleans up easily with water – even after it’s dried.

• Seals down stubborn curled seams, edges, tears and overlaps
• Professional strength – sets faster and bonds stronger
• Non-drip – makes application easy and neat
• Dries clear, non-staining
• Cleans up easily with water

FOR BEST RESULTS

Dampen front and back of paper, wait 5 minutes, apply adhesive, smooth flat.

Extended Information

APPLICATION

Use only when temperature is between 50-100°F
(10-38°C). Adhesive is ready to use. Apply a thin coat under

edges. Make sure the adhesive gets back into areas

where the wallcovering starts to separate from the surface.

For separated seams, dampen the front and back of loose

wallcovering or border with a damp sponge. Wait 5

minutes before applying adhesive. Smooth until flat.

If the edges are curled, press down and hold for 10 seconds.

Avoid contact with the surface of embossed or delicate

wallcovering.

DRY TIME

Drying time will vary depending on the wallcovering type,

temperature, ventilation and humidity in the room.

CLEAN-UP

Remove excess adhesive on or around the wallcovering

or border immediately with a clean damp sponge or cloth.

Blot dry with a soft towel. Additional effort may be required

if adhesive is allowed to contact the surface of embossed

or textured vinyl. Close tube tightly after each use.

TOOL CLEAN-UP

Clean tools with warm water.

STORAGE

Protect from freezing. Always keep the container tightly

closed and store in a cool dry place at temperatures

between 40-100°F (4-38°C). Normal storage life is one

year. The disposal of excess or left over product should

conform to local laws regarding water-based products.