Wolman Woodlife CopperCoat Green Wood Preservative

Wolman Woodlife CopperCoat Green Wood Preservative is formulated for below ground, ground and freshwater contact. The preservative is an insecticide and fungicide that prevents termites and other wood-boring insects from attaching themselves. The active ingredient is a transparent green color that naturally fades.

WoodLife Coppercoat protects and preserve below ground outdoor wood. Contains an insecticide and nearly double the fungicide of standard sealers or stains.

• Color: Green
• Base Type: Water-Based
• Product Type: Wood Preservative
• Indoor or Outdoor: Outdoor
• Full Cure Time: 24 hr
• Time Before Recoating: 60 min
• Paintable: Yes
• Coverage Area: 100-300 sq ft/gal
• Transparency: Semi-Transparent
• EPA-registered, insecticidal preservative prohibits termite damage, rot and decay.
• Inhibits surface growth of fungal organisms: mold, mildew and staining fungi.
• Imparts a transparent green color that naturally fades over time.
• Top coat with any oil-based primer, paint or stain after 24 hours.

For Best Results

Pre-treatment by dip method before installation is recommended. Also designed for protection of deck or porch floor end cuts.

If wood is brand new and intended for outdoor installation and exposed to weather conditions for 30 days or less, a “splash test” should be performed to determine if there is any surface barrier present which would repel a new coating. Sprinkle a few drops of water on several areas of the surface to be coated. If the water is absorbed rapidly, the surface is ready to be finished with Woodlife^® CopperCoat™. If the water beads are not absorbed into the wood, a surface barrier exists and must be removed. Apply or Wolman® Deck & Fence Brightener and then test again. Regardless of the surface’s age or condition, failure to follow proper preparation methods will result in poor adhesion and/or possible coating failure.

Technical Data Sheet